Tp Link

Tp-Link 8-Port TL-SG1008P Gigabit Desktop PoE+Switch

KES 8,500.00

Product Image
Product Image
Product Image
Product Image
Product Image
Product Image
Tp Link

Tp-Link 8-Port TL-SG1008P Gigabit Desktop PoE+Switch

From KES 8,500.00

Condition: new

 TL-SG1008P Key Specifications.

  • 8× 10/100/1000 Mbps RJ45 ports.
  • 4× PoE+ ports transfer data and power on individual cables.
  • Works with IEEE 802.3af/at compliant PDs.
  • Plug and Play, no configuration and installation required.
  • 802.1p/DSCP QoS enable smooth latency-sensitive traffic.
  • Supports PoE power up to 30 W for each PoE port.
  • Supports PoE power up to 64 W for all PoE ports*.
  • Up to 250m data and power transmitting range under Extend Mode**
  • PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices

KES 8,500.00

Tplink 8-Port TL-SF1008P Desktop 4-Port PoE Switch

Tplink TL-SF1008P 8-Port 10/100Mbps Desktop Switch with 4-Port PoE comes equipped with 8 x 10/100Mbps ports, four of which are PoE or power over Ethernet ports, allowing for simultaneous data and power to be provided through a single Ethernet connection.

With power over Ethernet capabilities you can easily connect access points TL-SF1008P is an 8 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs).

8-Port TL-SF1008P Desktop 4-Port PoE Switch  In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets,

where you wish to ­fix devices such as APs, IP Cameras or IP Phones, TL-SF1008P 8 port ethernet switch 4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function.

These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).

TP-link TL-SF1008P switch has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 57W, a priority will be arranged among the PoE ports, then the system will cut o? the power of the lowest-priority port.

TL-SF1008P is easy to install and use. It requires no confi­guration and installation. With desktop design, outstanding performance and quality, the TP-LINK’s TL-SF1008P 8-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network.

TP-link TL-SF1008P switch futures

HARDWARE FEATURES
Interface• 8× 10/100 Mbps RJ45 Ports (4× 10/100 Mbps 802.3af/at PoE+ ports)
• AUTO Negotiation
• AUTO MDI/MDIX
Network Media• 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
• EIA/TIA-568 100Ω STP (maximum 100m)
• 100BASE-TX: UTP category 5, 5e cable (maximum 100m)
• EIA/TIA-568 100Ω STP (maximum 100m)
Fan QuantityFanless
Physical Security LockYes
External Power SupplyExternal Power Adapter (Output: 53.5 V DC / 1.31 A)
Packet Forwarding Rate1.1904 Mpps
PoE Ports (RJ45)• Standard: 802.3 af/at compliant
• PoE Ports: Ports 1–4
• Power Supply: 66 W
Mac Address Table2K
Jumbo Frame2 KB
Switching Capacity1.6 Gbps
Dimensions ( W x D x H )6.7 × 3.9 × 1.1 in (171 × 98 × 27 mm)
Max Power Consumption2.27 W (220 V/ 50 Hz. no PD connected)
75.33 W (220 V/ 50 Hz. with 66 W PD connected)
Max Heat Dissipation7.74 BTU/h(no PD connected)
256.88 BTU/h(with 66 W PD connected)
SOFTWARE FEATURES
Transmission MethodStore-And-Forward
Advanced FunctionsExtend Mode Button (Ports 1–4)
Priority Mode Button (Ports 1–2)
PoE Auto Recovery Button (Ports 1–4)
Mac Address Auto-Learning and Auto-Aging
OTHERS
CertificationFCC, CE, RoHS
Package ContentsTL-SF1008P, Power Adapter, Installation Guide, Rubber Feet
EnvironmentOperating Temperature: 0–40 ℃ (32–104 ℉)
Storage Temperature: -40–70 ℃ (-40–158 ℉)
Operating Humidity: 10–90% RH non-condensing
Storage Humidity: 5–90% RH non-condensing
HomeWishlistCartCall